How To Enter Windows 10 Safe Mode 2021

Switching to Safe Mode in Windows 10 – Switching to Safe Mode in Windows 10 is slightly different from previous versions of Windows. But don’t get confused, starting up in secure mode in Windows 10 is actually quite simple.

Switching to Windows 10 Safe Mode

Safe Mode is generally used for troubleshooting problems with a laptop or computer that has experienced errors. In many cases, Safe Mode is used to combat viruses that damage Windows programs.

More information can be found here:

If you switch to protection mode, the windows will only work with the necessary drivers and programs. This way, viruses cannot disturb your laptop or computer in secure mode.

Then you can easily find solutions and correct the errors on your laptop or computer, so that Windows works properly again.

The 4 best ways to enable Safe Mode on Windows 10 2021

Normally, you will need to press the F8 key when booting up your laptop/computer to enter Windows secure mode. For Windows 10, however, there are several options that differ greatly from each other.

This method can be applied to computers and various brands of notebooks such as Lenovo, Asus, HP, Dell, Acer and other brands. The most important is the use of the Windows 10 operating system.

Here are some ways to try to enter Safe Mode in Windows 10.

1. Shift + restart

Shift + restart

The first method is very simple and takes little time. This method is perfect for those of you who are beginners or experts in Windows 10.

How to access the secure mode window from the bios :

  1. Click on the Power option in the Start logo of your Windows laptop.
  2. Press and hold the Shift key and the Reload option.
  3. You will then be redirected to the recovery mode menu.
  4. Select Troubleshooting> Advanced Settings> Startup Settings.
  5. Then click Start again.
  6. Press the F4 button to switch to normal protection mode.
  7. Or F5 to work with the network in secure mode.
  8. Wait a few minutes and you’ll go into secure mode.

The secure mode with network connection is a secure mode in Windows 10 that can be connected to a Wi-Fi Internet connection or a local area network.

2. per boat

per load

You can access Windows 10 Safe Mode through the boot process by first configuring it in System Configuration. The system configuration, or MSConfig, manages all configurations of a Windows 10 system.

To switch to Windows Safe Mode during the boot process :

  1. Open the Run menu / press the Windows + R keys simultaneously.
  2. Then type MSConfig in the Run column.
  3. Click on the Startup menu tab at the top of the System Configuration chapter.
  4. In the Priming Options section, select the Safe Boot checkbox.
  5. Then click on OK to make a request.
  6. Finally, reboot your laptop or Windows 10 computer.

How to restore Windows at startup without secure mode. Just use the same instructions as above and then disable the Secure Boot option.

3. Extended commissioning

Advanced commissioning

To access the Windows Safe Mode, you can first configure it from the Advanced Startup Options menu. This method is quite simple and is often used to switch to secure mode on different brands of laptops.

How to enable secure mode on a Windows laptop :

  1. At the same time, open the Windows settings / press Windows + I.
  2. Click on the Update and Security menu and select the Restore option.
  3. In the Advanced Running section, click Restart now.
  4. Windows restarts and enters recovery mode.
  5. Select Troubleshooting>Advanced Options>Start Settings.
  6. Then select the Restart option.
  7. Press the button according to the selected Protected mode option.
  8. F4 for normal safe mode, F5 for safe mode with network.

Network Secure Mode is a secure mode that can connect to the Internet over Wi-Fi or LAN.

4. via CMD

via CMD

In Windows 10, the F8 function for entering Safe Mode is exited. However, you can reactivate the F8 function via CMD so that it can be used to access Windows 10 Safe Mode.

How to get into the secure mode of Windows 10 via CMD?

  1. Click Start window in the corner of the notebook or PC screen.
  2. Type CMD and right-click Run as Administrator.
  3. Type bcdedit / set {default} bootmenupolicy legacy in CMD.
  4. Press the Enter key to accept the job.
  5. Then reboot your Windows 10 laptop.

You can now press the F8 key during startup to go to window 10 of the Safe Mode menu. To restore F8’s functionality like any other, run the default bcdedit / set {default} bootmenupolicy command with the same instructions.

More information can be found here:

Conclusion:

Here are some ways to access Windows 10’s secure mode that you can try out on your laptop or desktop computer. Just use one of the four methods you find easiest and most effective.

Don’t forget to bookmark and always go to .com every day, because there you’ll find the latest information on technology, such as tips and tricks for blogs, digital marketing windows and ETC (root social media games). Good luck!

Related Tags:

safe mode windows 10 from boot,windows 10 safe mode key,windows 10 safe mode from bios,how to get out of safe mode windows 10,windows 10 safe mode 2019,windows 10 safe mode dell,how to boot windows 10,what is windows safe mode,windows 10 safe mode command prompt,windows 10 safe mode hp

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *